Quantar HELP!!!
Posted: Thu May 03, 2007 4:46 pm
Hello
First off I wanted to tell you guys yall are the best! Im only 21 and have been into radios since i was little so ever since I have been able to work i have been spending my $$ on radio stuff. I built a 220ft Rhon 44g tower on the highest point within 100miles and Im currently (Licensed- Commerical)using a tkr-750 5ow @ 50% with a duplexer and a 4bay vhf dipole and commscope 7/8 hardline. Well I decided that i was not getting enought range so I came across a vhf range 2 quantar and nice set of duplexers, I cost me a arm and leg but i got it. (BTW there is no Moto dealer around here, only one is private 4 the citys 800system) Well with that said I have no Idea how to program a quantar, I have the ver 10.rss and played around it ( i can do all moto mobiles but im not really familiar with there repeaters) Kenwood is s much easier, So I saved the codeplug and started to work with it a little and got the a test set of channels and tried to test it well it didnt work and the rx fail light came on and i can transmit on the portable and hear it on the quantar but it will not repeat. I went to pull up the old code plug and now i cant seem to find it
. So thats where i need yall
I am goin to post a link to my codeplug and was goin to see if anybody can take a lok at it and possible help me out. I know it wil need tuning and also the duplexers and that I will need to go through the process of upgrading my license to 125w fb2 instead of 50...more $$ soo....
With all that said the quantar came with a SAM and I have no need for it. All i want to do with the repeater is a conv vhf fb2. So if anybody is in need of a sam and mabye has the time to help me out...I think the sam run about 1k I dont know how much anybody on here will charge to tune my repeater and duplexer and have it ready to work but if anybody is willing please pm me just reply...If the sam is not worth that then sombody please let me know so i dont feel stupid
.....thanks 4 readin my long problem....heres the link
[url] http://files-upload.com/207592/QUANTAR1.html
First off I wanted to tell you guys yall are the best! Im only 21 and have been into radios since i was little so ever since I have been able to work i have been spending my $$ on radio stuff. I built a 220ft Rhon 44g tower on the highest point within 100miles and Im currently (Licensed- Commerical)using a tkr-750 5ow @ 50% with a duplexer and a 4bay vhf dipole and commscope 7/8 hardline. Well I decided that i was not getting enought range so I came across a vhf range 2 quantar and nice set of duplexers, I cost me a arm and leg but i got it. (BTW there is no Moto dealer around here, only one is private 4 the citys 800system) Well with that said I have no Idea how to program a quantar, I have the ver 10.rss and played around it ( i can do all moto mobiles but im not really familiar with there repeaters) Kenwood is s much easier, So I saved the codeplug and started to work with it a little and got the a test set of channels and tried to test it well it didnt work and the rx fail light came on and i can transmit on the portable and hear it on the quantar but it will not repeat. I went to pull up the old code plug and now i cant seem to find it


With all that said the quantar came with a SAM and I have no need for it. All i want to do with the repeater is a conv vhf fb2. So if anybody is in need of a sam and mabye has the time to help me out...I think the sam run about 1k I dont know how much anybody on here will charge to tune my repeater and duplexer and have it ready to work but if anybody is willing please pm me just reply...If the sam is not worth that then sombody please let me know so i dont feel stupid

[url] http://files-upload.com/207592/QUANTAR1.html