Batboard

Forgive me,

It's for the Saber 1E and Saber 2 models

-------------------------------------------------------------------------------------

Hello all

Let's say that I want to program a DPL onto an analog/conventional radio on an analog frequency. If I wanted to use D723 or D754 for example, how would I do this?

Thanks

Well, that really depends on what kind of radio it is. You need to be much more specific.

select DPL and then select the dpl number you want for tx and rx

Your program probably has "PL" showing now, but if
you go through that menu point with the up/down arrows
it will roll over to
DPL and Inverted "INV" DPL. So, roll it to whatever
mode you want and the slot to select the PL tone or
the DPL number you need will then appear.
Let us know if you get stuck.