Batboard

Hi, i'm currently programmming my cdm1250 with cps 6.04, and i am trying to figure out how i can set the radio up to receive quik call 2 tones and beep like a minitor. I am not exactly sure how this is accomplished, but i just want it on one single frequency. i dont want to set any tones off, as its for my local department and that could be an issue. also, i have the cps set so that i can edit my scan list in the radio, however when i go into the scanlist on the radio and choose delete, it doesnt remove it from the scanlist. what am i missing. if anyone has suggestions please let me know

michael

for the qc, first go to the signalling tab and then select quik-call system. here is where you edit the specifics for each system (format, tones, alert type etc)

then create a conventional personality and assign quik-call as the signalling system as well as the frequency and such

then go to personality assignment to zone and assign the channel