Batboard

gday there all, just got myself a xts3000 from the local government auctions and it has unprogrammed on the lcd and emiting a annoying tone, could anyone please send me a compatible codeplug for the following model preferbly for the earlier dos versions of astro portable software ,my email address is below, many many thanks to whoever reads this post and helps me out

i just got in to the service menu and realised it has a different flashcode then it says on the sticker also found out the host and dsp details if that helps to narrow it down , thanks all:)

Model : H09RDH9PW7BN
Mfg code : 549008-000600-2
Host 5.60.00
DSP 6.05.02

im also prety sure the radio has digital encryption and use to run on a smartzone smartnet system with a few conventional channels inbetween.

Motoguy
[email protected]

gday people, any dos codeplug for a model 3 xts3k wich suports the below functions or very similar would be greatly appreciated regardless of flashcode . the flashcode below is mine on the back of the radio and the flashcode in the post above is the current loaded codeplug wich comes up with error 09/10 ? as long as it is similar in main features such as IMBE P25 and both smartzone options with the conventional voting scan. im hoping this will broaden the number of people who can help me through this as id love to be using this lovley piece of equipment,please send all relevant replys to the below address. thanks again bat brigade!

540008-000600-1

Q806/G806 IMBE / APCO-25 Digital Operation
H14/G114 Digital ID Display
H868/W969 Multikey Operation
H38/G51 Smartzone Operation
Q387 Conventional voting scan
Q173/G173 Smartzone OmniLink Operation

[email protected]

BUMP!

any good dos copeplug wich any basic flashcode would be great as long as it matches the dos rss 9.3 or lower and same model number ! Come on fellas i have an expensive brick here

Have you tried reading it?

gday there mate, yes i have tried reading it under 6.5, 8.5 and 9.3 dos and all return the codeplug to new saga, im looking in to buying the latest windows cps from my local moto dealer next week but id realy liek to be able to use this radio before then hence why i asked for a dos compatible codeplug as i only have access at my friends workshop to astro portable dos 8.5 and 9.3 so there for i could program mine myself with a short journey to my friends house other than spending $400 AU on the CPS and programing it from my home . i think i will end up having to buy the CPS personly for the sheer conveinience.

last call for a dos codeplug or im going to order the latest CPS wich will be compatible with the current loaded codeplug

If you shove another codeplug into the radio without first reading it and saving the alignment data, you WILL turn it into a paperweight. It'll operate poorly and unpredictably, quite possibly putting you into some serious trouble with ACMA.

ok then , how do i read the alignment data by itself and save that first ? is it possible?, thanks for your help mate

motoguy wrote:ok then , how do i read the alignment data by itself and save that first ? is it possible?, thanks for your help mate

with the xts tuner program. tuner 1.02 has been around for ages

Jeez, so the radio works, you just have a too new issue? Can you pull the s-rec?

Jaosn

motoguy wrote:ok then , how do i read the alignment data by itself and save that first ? is it possible?, thanks for your help mate

By using a newer version of CPS, which would negate your original problem.