Batboard

Hello all

I was programming a new CDM1250 (Vhf) and did not realize that the battery in my RIB was low. I read the code plug with no problems modified the configurationand then downloaded the modified code plug. All went well to this point. I realized I had an error in the zone arrangement and then downloaded the corrected code plug. This is when it locked up on download. After cycling the power to the radio it came up with a "EEPRM CS ERROR". After reviewing previous posts regarding this error I checked my battery and found it low. Replaced the battery and then downloaded the code plug and all appeared OK. I then made another change to the software and downloaded it and got another EEPRM CS ERROR. Now every time I try to download the code plug my CPS gets an internal error and terminates the program. Anyone have any experience with this problem and a solution or do I need to sent the brick
back to /\/\.

Thanks, Chris

http://batboard.batlabs.com/search.php? ... M+CS+ERROR

While the search function isn't always fantastic, it's a great resource to gain valuable insight in to a problem.

Read through some of those topics and see if they help answer your question.

-Alex

One thing I did with my HT1250 was write an old version of my codeplug and it worked.