Page 1 of 1

How do I add a channel to a Minitor?

Posted: Sat Jul 07, 2007 7:31 am
by ffexpCP
Why does the digital/voice paging section of the forums show up and then disappear? I can't find it. Anyway…

I’ve read stuff about converting a one channel Minitor 3/4 into a 2 channel on here, but I’m confused. One way hints ant going into the engineering part of the software and changing the box for single/dual channels. Another way says you can dump a dual channel codeplug into it and it will work just fine. Yet another way says something about editing some hex stuff. I really don’t want to get into that.

What is the EASISET way to convert a one channel to a dual channel?

Also, anyone try to add a channel to a minitor 5?

Re: How do I add a channel to a Minitor?

Posted: Sun Jul 08, 2007 4:38 am
by tvsjr
Engineering mode is the easiest way, and it can be done on the 3/4 software and the 5 software. The 5 simply requires a bit more effort.

Re: How do I add a channel to a Minitor?

Posted: Sun Jul 08, 2007 10:35 am
by ffexpCP
Thanks. The 3/4 sounds easy enough. I don't see an engineering part on the Minitor V PPS. What should I look for? I do have a 2 ch codeplug in the same band split, would it work if I write it to the one channel pager?

Re: How do I add a channel to a Minitor?

Posted: Sun Jul 08, 2007 2:27 pm
by mattsca
how do you get to the Engineering mode in the mintor 3/4 and min 5 rss ?

Re: How do I add a channel to a Minitor?

Posted: Mon Jul 09, 2007 11:41 pm
by ffexpCP
On the 3/4:

http://batboard.batlabs.com/viewtopic.p ... lit=taipei

I have no clue about the 5. Anyone?

Re: How do I add a channel to a Minitor?

Posted: Thu Feb 07, 2008 1:33 am
by northstarfire0693
What kills me is that it is said it can be done on the v, but when you ask no one will tell you how. Is their a reason for that. Please share the info.

Re: How do I add a channel to a Minitor?

Posted: Thu Feb 07, 2008 5:53 am
by Batwings21
I don't have it, but its a current product and Moto reads these forums. If its posted for all to see, they will change the software so it won't work. Thats why v is harder than 3/4...

Re: How do I add a channel to a Minitor?

Posted: Thu Feb 07, 2008 7:23 am
by tvsjr
Possibly because I haven't had time to write up the mod yet? Most of us DO have lives outside this board, you know... and paying customers come first. If you'd like to pay my billable rates, I can probably get the info posted a lot quicker. PM me and I'll send you a Paypal account, k?

Re: How do I add a channel to a Minitor?

Posted: Thu Feb 07, 2008 9:12 am
by northstarfire0693
Thanks for the info..... I guess that would be a bad thing cuz big /\/\ reads the stuff..... Tvgr ( I guess I got it right ) I was not lashing out on you..please dont take it that way..Thanks for you imput..

Re: How do I add a channel to a Minitor?

Posted: Thu Feb 07, 2008 9:13 am
by northstarfire0693
tvsjr srry about the name screw up