Batboard

Just acquired an HTN9000A charger (base/cup ONLY), for my HT1250. Can someone with
one of these tell me the current rating of the wall wort/cube/whatever-you-call-it please, so I can
replace it? It actually says what it uses, but I'd like to verify because I've seen discrepancies
before on things like this, PLUS they're usually labeled by current not watts Thank you.

It says Class-2, 18v +/- 20%, 15.3w, positive tip.

kk6rq wrote:Just acquired an HTN9000A charger (base/cup ONLY), for my HT1250. Can someone with
one of these tell me the current rating of the wall wort/cube/whatever-you-call-it please, so I can
replace it? It actually says what it uses, but I'd like to verify because I've seen discrepancies
before on things like this, PLUS they're usually labeled by current not watts Thank you.

It says Class-2, 18v +/- 20%, 15.3w, positive tip.

15.3w/18v == 0.85a

The bricks I have for the Impres version (which are the same as for the non-impres version) state 18v at 900mA, so that seems right on the money.