Page 1 of 1

XTS 3000 case swap

Posted: Sun Aug 26, 2007 11:13 am
by bulletproof-791
ok i am getting a XTS3000 radio in Yellow...the ?? i have how hard is it to swap the yellow case for a Black case ?
i have done ht750,1250,ht1000's is it about the same ?
someone please let me know and how to do it
thanks again

Re: XTS 3000 case swap

Posted: Sun Aug 26, 2007 11:30 am
by txshooter
http://batboard.batlabs.com/viewtopic.php?f=4&t=61128
Batdudes Guide at the top of the Astro Section will get you through it with no problems.

Re: XTS 3000 case swap

Posted: Sun Aug 26, 2007 12:43 pm
by bulletproof-791
thanks.....that will help

Re: XTS 3000 case swap

Posted: Tue Aug 28, 2007 9:02 am
by dxon2m
That guide will cover you everything you need to do the swap. Just take your time and don't rush. Use extra care when working around the LCD

Re: XTS 3000 case swap

Posted: Tue Aug 28, 2007 9:20 am
by bulletproof-791
ok ...i dont have a display...mine is a model 1...i did order the "RIGHT M" part to remove the case..no i just need to find a black case, dont really care for the yellow

Re: XTS 3000 case swap

Posted: Tue Aug 28, 2007 9:53 am
by Monitor142
Do a search for Panter88 on ebay. This seller has cases for all models of the XTS for a reasonable price with the electronics. If someone can confirm, there may be two different types of connectors for the ribbon cable. My M3 has the 40? pin D connector and my replacement case that I purchased from this guy looks brand new. I was in your boat and went from yellow to black.

Good luck.
Brian

Re: XTS 3000 case swap

Posted: Tue Aug 28, 2007 10:00 am
by PhillyPhoto
Monitor142 wrote:Do a search for Panter88 on ebay. This seller has cases for all models of the XTS for a reasonable price with the electronics. If someone can confirm, there may be two different types of connectors for the ribbon cable. My M3 has the 40? pin D connector and my replacement case that I purchased from this guy looks brand new. I was in your boat and went from yellow to black.

Good luck.
Brian
That's correct, panter88 sells revision "B" cases. So make so your sticker on the back plate ends in "BN" for the model number and you'll be fine. The "A" revision has a white connector vs the B revisions black one.

I've ordered 3 cases from panter, and they all work great, and I've gotten them in about a week and a half from Hong Kong.

Re: XTS 3000 case swap

Posted: Tue Aug 28, 2007 10:14 am
by bulletproof-791
ok here is the model #
H09RDC9PW5 BN
SO I GUESS IT WILL WORK

Re: XTS 3000 case swap

Posted: Tue Aug 28, 2007 10:16 am
by Monitor142
Well if it's legit, me thinks you are "good to go" :lol:

Brian

Re: XTS 3000 case swap

Posted: Tue Aug 28, 2007 2:24 pm
by MTS2000des
Panter's stuff is top notch, his housings are complete with stickers and clean- shipping usually takes 7-10 days- he's much cheaper than Moto and other Ebay sellers.

Re: XTS 3000 case swap

Posted: Tue Aug 28, 2007 3:05 pm
by bulletproof-791
yep found them on ebay 40.00+10.00 shipping thanks for all the info..and i just ordered the "special tool" to remove the case;....whopping 4.00 form BIG "M"
:lol:
so in anyone wants a MINT yellow xts3000 case make an offer