Batboard

How would one go about rebanding a fully legit, all tags matching 800 MHz Astro Saber III with a 1 meg vocon board?

If one was a "civilian", that is. Purpose is strictly to increase the radio's resale value.


Elroy

It would need a host/dsp upgrade. There is differing opinions on what rebanding host is, some say 7.25, others say 7.70.

Jason

Correct me if I'm wrong but I don't think Astro Saber are rebanding capable? Only the ASTRO25 line are?

I am quite sure that Astro Sabers are rebandable if they have the later 1 meg vocon board.

Elroy

dxon2m wrote:Correct me if I'm wrong but I don't think Astro Saber are rebanding capable? Only the ASTRO25 line are?

The astro sabers are the same as far as the firmware goes as the XTS3000s, and they are rebandable, but they do require the newer firmware. I've heard it is around the 7.7x revision.

Yes, as I understand it you need revision 7.70 or greater to support rebanding on an XTS3000 or Astro Saber.

Elroy

If you have a model II or III the newer displays also require newer firmware, and the firmware upgrade is included with the new displays. So if you play your cards right, you can get a new display and firmware for about $80, and then you can sell you old display to someone with older firmware for a little less than that and just about break even, and get rebanding firmware!

LuiePL wrote:If you have a model II or III the newer displays also require newer firmware, and the firmware upgrade is included with the new displays. So if you play your cards right, you can get a new display and firmware for about $80, and then you can sell you old display to someone with older firmware for a little less than that and just about break even, and get rebanding firmware!

He is talking about an astro saber, not an XTS3k.

Jason

LuiePL wrote:If you have a model II or III the newer displays also require newer firmware, and the firmware upgrade is included with the new displays. So if you play your cards right, you can get a new display and firmware for about $80, and then you can sell you old display to someone with older firmware for a little less than that and just about break even, and get rebanding firmware!

MOdel 2 or 3 XTS 3000...not the Astro Saber on your display idea.

Yeah, forgot to put that little tidbit in. Sorry!

The 800MHz. ASTRO Saber radios with 1-Meg. boards are indeed rebandable. Contact Motorola support and request a "Estimate of Upgrade Form" and all you'll need to do is fill out the form with as much of the information as you can possibly provide, fax it back to the number provided and they will issue you a price quote and a location to ship the radio to, usually Schaumburg, IL.

I recently sent in a few 800MHz. ASTRO Sabers III's myself and they cost me $75 each (Price based on our contract). They were returned with the following: Host=R07.71.00, DSP=R08.03.03, which by the way is the latest firmware and from what I found out, will most likely be the final firmware release.

Hope this information was helpful and good luck...

Jerry

Thanks, I forogt about the existance of 1MB Astro Sabers. All the previous AS I've owned are 512K ones.

Sorry for the confusion

I have an 800 AS3 with 7.25 that is rebanded...I have a feeling that 7.7 addressed some issues that may have been found with 7.25..but I haven't noticed any on my end.