Page 1 of 1
Wanted: XTS3000 P25 S-Recs
Posted: Wed Sep 05, 2007 7:23 pm
by PhillyPhoto
I know this might be a stretch for the first one, but I'd like an "S" split UHF s-record with 9600baud/bps flash. It must have IMBE/Smartnet etc. I'd like it to be a model III, but will take a II. Secondly, I'd also like one in 800MHz. Same options as the UHF.
Re: Wanted: XTS3000 P25 S-Recs
Posted: Thu Oct 11, 2007 12:50 am
by PhillyPhoto
2nd request. I'll settle for the 800 record for now. Thanks.
Re: Wanted: XTS3000 P25 S-Recs
Posted: Fri Oct 12, 2007 6:42 pm
by batdude
you need to be aware that there is a VERY specific release of firmware for the 3000 to support 9600bps.
if you don't have that EXACT firmware, it will not work ... the radio will FAIL 001
someone here i'm sure has the exact revision required.
doug
Re: Wanted: XTS3000 P25 S-Recs
Posted: Sat Oct 13, 2007 2:30 am
by Hightower
Yep, the firmware is R06 dot something for 9600.
So you'll need a very specific firmware AND s-rec.
Re: Wanted: XTS3000 P25 S-Recs
Posted: Sun Oct 14, 2007 12:20 pm
by CTAMontrose
Was 9k6 even made available in UHF? the only ones i have ever seen were 800.
Re: Wanted: XTS3000 P25 S-Recs
Posted: Sun Oct 14, 2007 12:53 pm
by MattSR
Any 6.xx release will work. Its not that specific.