Maratrac Discriminator & No Control Head Operation.

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
adamj812
New User
Posts: 15
Joined: Thu Aug 16, 2007 12:02 am

Maratrac Discriminator & No Control Head Operation.

Post by adamj812 »

Ok, by applying 12vdc to pins 4 and 19 and negative to 13 and 17, I've found this should power the radio up for programming. Will doing this also put the radio into receive mode? I wasn't sure if that meant it just powered enough components for programming.

One more thing, where is the best place to get a good level of non-demphasized (discriminator) audio from the unit?

Thanks,
Adam
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”