Batboard

Hi guys i am used to program those old DOS GP300 and P110 but i am new on those CPS software. My question is I have Version CPS R06.05.03 for professional radio and I have Entry Level CPS R02.02.00 and CPS R01.0 and Commercial Serieos Customer Porgramming Software R05.05 . Which software is for programing which radio. I have tried the R06.05.03 to program the HT1250/GP338 it works on the GP338 but does not work on the HT750. Is there different in the US version and the asia version? Most of the cable i got for EX500 and HTs and CP200 and Mag One is Ribless cables which software do i use to program those radios? I do have HT1000 ribless cable but looks like the old DOS program doesn't work with ribless cable so which CPS should i use? Any help is greatly appreiciated.

P.S If i want to program US version radio can i use asia version software?

Thank you and hope to hear from you guys soon!!!

The Professional Software 6.05 is for the HT/CDM series and the CPS 2.02 Software is for the CP200's.

Thank you for your help but can asia software works on us radios? I have both GP338 and HT750 one is from AU and one is from US. It seems that GP228 works but not the HT750 or HT1250. : )

Take a look at this thread on expanding the regions supported by the Professional Series CPS:

http://batboard.batlabs.com/viewtopic.php?f=1&t=27877

Hi thank you for your reply, do u know if i should just modify or modify binary data? there is 2 colum i can motify. I dun wanna hit the wrong button. I found the Registry but dunno how to motify it. Please help me out if u can. Thank you so much again!