Page 1 of 1
MDC-1200 PTT ID display AS3
Posted: Tue Sep 11, 2007 1:03 pm
by bradlington
Can someone assit in answering me regarding MDC:1200 AS3 to display the codes on the screen.
Astro saber 3 : MDC-1200 working well and paging etc all good.
Any ideas on settings for the ID:displaying code .
Thnaks in advance
Brad
Re: MDC-1200 PTT ID display AS3
Posted: Tue Sep 11, 2007 2:24 pm
by Batwings21
What is the flashcode of your radio, get it then run it through a flashcode decoder, you must have h14, digital id display, or it will not display.
Re: MDC-1200 PTT ID display AS3
Posted: Wed Sep 12, 2007 9:45 am
by bradlington
Mfg Code(FLASH PORT ): 0000010000009
Power-up test: AP_R03.33.00
DSP N05.01.04
EMC 2.012
KG1-DES
KG2-NONE
H04RDH9PW7AN
I am sure I did check and do not remember the H14 package.
Re: MDC-1200 PTT ID display AS3
Posted: Wed Sep 12, 2007 10:07 am
by txshooter
Decoding Flashcode: 000001-000000-9
H35 Conventional Systems Operation
<A HREF="
http://www.akardam.net/moto/decode3.pl">Decoded by akardam.net FC Decoder</A>
Conventional Only nother other options. No, you do not have H14. You also have extremely old firmware and most likely a 512K radio. Not a 1 Meg unless the radio is marked as 1 Meg.
Great radio for conventinal use.
Re: MDC-1200 PTT ID display AS3
Posted: Wed Sep 12, 2007 10:13 am
by bradlington
Thanks for that - I know it is old but when I got it it was last programmed in DEC 1999 .
These radios had not been used , so I have mint radios but old Firmware .Digital at the moment really sounds good.
I cant be fussy as I am sure I am the only amateur in the country playing with commercial digital .
Thanks for the help.
Brad
http://groups.yahoo.com/group/ASTROdigital_X