Looking for Maxtrac 800 MHz manual, PDF desired
Posted: Sat Sep 15, 2007 3:36 pm
Looking for info to repair an 800 MHz Maxtrac. It is a D35 series model with a 5 pin acc.
connector.
Would like to be able to work on the control board and VCO area of the radio.
Also have PTT issue, so need to follow the mic PTT back to the control board.
RX works just fine.
Been too many years since I repaired one of these and can't remember the information.
Jim
connector.
Would like to be able to work on the control board and VCO area of the radio.
Also have PTT issue, so need to follow the mic PTT back to the control board.
RX works just fine.
Been too many years since I repaired one of these and can't remember the information.
Jim