Page 1 of 1
Astro Spectra A4 to A5, possible?
Posted: Tue Oct 23, 2007 5:43 pm
by libuff
what is required to change from the rotary dials to the normal flat panel.. with minimal buttons... although, truly, an a7 would be better!
i've attempted the search feature before posting, so please don't berrate me if this exists before. Thanks all!
Re: Astro Spectra A4 to A5, possible?
Posted: Tue Oct 23, 2007 9:43 pm
by n7maq
libuff wrote:what is required to change from the rotary dials to the normal flat panel.. with minimal buttons... although, truly, an a7 would be better!
i've attempted the search feature before posting, so please don't berrate me if this exists before. Thanks all!
You need the new control head, and a s-record, or DOS archive from the correct model/band. You need LAB RSS to force in the s-rec or archive. Before you load the new codeplug you also want to record the softpot values from your existing codeplug. They will need to be re-loaded into the radio once the new codeplug is in. It's best to do a re-alignment if you have a service monitor.
Jim