Batboard

I have one of our departments ht1250 radios that wont transmit on channel 1 it transmits fine on all other channels. when you key up on channel 1 the red led lights up as if it is transmitting but nothing is sent we tried reprogramming it with a code plug from a radio that works fine but still nothing.

email me the codeplug and i'll look at it if you can't find it. make shure it's not a recieve only channel and make shure you have the correct pl/dpl.

What I did was reprogram channel 1 with a different freq and it works fine , then i copied its code plug to a different radio and it worked fine with the original channel 1 freq. so then i programmed it all back the way it was and still no transmit