Batboard

I have several Spectra 450 & 800 RF boards HRN6003 or HRN6010 with a chip resistor R633 82K that has been hot. Some burned the board and the trace. This seems to be a common problem. I really don't see anything on the schematic that would cause this type of current. Perhapes it is a trace onthe multilayer shorted. Any thoughts on repair.
Johnny S.

That is NOT burn you see there, and yes it IS a common problem.
The capacitor leakage has eaten the resistor and the circuit board away.

I repair them here...

Johnny,

I sent you a email and a PM.

Glad to help,

Will