Page 1 of 1

911ep Millenium HELP

Posted: Sat Nov 10, 2007 12:30 am
by 35FF/Emt-S
Hi, New guy on this site. I am a Firefighter and EMT-Specialist with a 1,500 call/year Fire Department in Michigan. I have many lights on my personal vehicle which include 911ep, Whelen, Code 3, SVP, and Sho Me. My questions is:

I have a 911ep Millenium lightbar (36 inch) and have searched everywhere from Hell to High Water for a mounting kit and more importantly the programming cable for the bar. Or a diagram of the wire hookups on the connector pins would help to because I have a cable but the pins are not correct and without the diagram nobody will fix it for me. Any and all help will be greatly appreciated.

Thanks

Re: 911ep Millenium HELP

Posted: Tue Nov 13, 2007 9:33 am
by Pj
The Millenium is a discontiuned product, however you should still be able to get mounting feet and other stuff for it. Worse case, call 911ep at 800-863-6911 and they can point you to a close disturbtor.

In install guides can be found here:
http://www.911ep.com/PDF/Millennium_InstallTabloid.pdf
http://www.911ep.com/PDF/Millennium_Mounting.pdf
http://www.911ep.com/PDF/640004CID_InstallGuide.pdf

There are some experienced people over at http://www.elightbars.org that can also help you out.

Re: 911ep Millenium HELP

Posted: Wed Nov 14, 2007 10:37 pm
by RFguy
Heres some pictures of the inside of the bar:

http://www.elightbars.org/bb/blown-up-9 ... t9364.html

Re: 911ep Millenium HELP

Posted: Fri Nov 16, 2007 12:51 am
by 35FF/Emt-S
Pj wrote:The Millenium is a discontiuned product, however you should still be able to get mounting feet and other stuff for it. Worse case, call 911ep at 800-863-6911 and they can point you to a close disturbtor.

In install guides can be found here:
http://www.911ep.com/PDF/Millennium_InstallTabloid.pdf
http://www.911ep.com/PDF/Millennium_Mounting.pdf
http://www.911ep.com/PDF/640004CID_InstallGuide.pdf

There are some experienced people over at http://www.elightbars.org that can also help you out.
Thanks for the response. I called 911ep they were helpful but couldn't really help me out. They sent me the programming software but they don't have the mounting kits or programming cables since the Millenium was discontinued.

I have attempted a few times to become a member of elightbars which is how I find this site. But they have not activated my account for some reason and emailing the administrator didn't help, I did not even get a response.

Re: 911ep Millenium HELP

Posted: Fri Nov 16, 2007 12:52 am
by 35FF/Emt-S
RFguy wrote:Heres some pictures of the inside of the bar:

http://www.elightbars.org/bb/blown-up-9 ... t9364.html

Re: 911ep Millenium HELP

Posted: Fri Nov 16, 2007 12:52 am
by 35FF/Emt-S
RFguy wrote:Heres some pictures of the inside of the bar:

http://www.elightbars.org/bb/blown-up-9 ... t9364.html
Thats a Galaxy, not a Millenium