Batboard

The EX600XLS and I think the HT1550XLS state that you can have 99 channels per zone. I have been working with the codepug from an EX600XLS (6.08.05 CPS) and I cannot get it to do this.The assignment wizard will only allow 1 zone to a have max 16 channels. So what is the trick? Does this mean it will scan more that 16 or not? If not this feature would be useless .If you cannot explain it a codeplug would be worth a thousand words.

you can email me your codeplug and i'll look at it. i have over 30 channels in some of my zones so i know it will do at least that. one thing to checd would be in your controls and menues go to the conventional button tab and make shure you have the rotary knob set to continous.

HLA wrote:you can email me your codeplug and i'll look at it. i have over 30 channels in some of my zones so i know it will do at least that. one thing to checd would be in your controls and menues go to the conventional button tab and make shure you have the rotary knob set to continous.

I sent you an e-mail

i also have an EX600xls and i cant seem to figure out how to make my rotary knob up top to change my channels and to get my front buttons to change my zones. any help will be great, thanks, Tom

email me the codeplug and i'll look at it.

Ensure that you have you top selector assigned to Channel selector Continous, then you should be able to add upto 99 channels into a zone flawlessly....

i can enter the channels and i have the rotary knob set to continuous, but it only allows me to assign the #2 front button for "zone" . this is where i run into the troubles