Page 1 of 1

Posted: Fri Oct 26, 2001 10:56 am
by Cowthief
Hello.

I cam across this old radio, leather covered thing, more box-like than anything.
Metal tag reads " Galvin Mfg, Chicago, Ill "

Sheet explains, hold button down, wait, listen for page.

This thing has tubes, and not the really tiny things.

No crystal, tuned Osc, somewhere around 2 to 3 MHz.

What looks a tiny bit like a badge stamped on, very worn, Detroit?.

Belt slot on back, wide, very brittle.

Oxblood?, colored.

Anybody have any answers?.

Posted: Fri Oct 26, 2001 12:59 pm
by radioEd
I'd like to see a pic of that! got a cam? Ed

Posted: Fri Oct 26, 2001 5:44 pm
by 10-95
Sounds like the receiver from Galvin's(Motorola's) first handie talkies, they had two seperate peices, a transmitter and a receiver.

Frank

Posted: Sat Oct 27, 2001 8:54 am
by radioEd
Cowthief! you have a pic. of this unit? Ed

Posted: Sat Oct 27, 2001 12:12 pm
by Cowthief
Hello.

Will try to get pix.
found date code, Mar 1938.
Found another Moto radio, this thing has a speedometer like flex-shaft that goes to a control head, mechanical, this connects with a 200 series telephone handset, again, no crystal, VFO, the antenna shows to be a wire screen, this is correct?.
The unit is in 3 boxes, Rec is in on box, Trans is another, RX/TX control and PS ' batterys, another.
This stuff comes from a trucking company that has been in business since the 1920s,
Pixs of some early radio shows it was mounted on the running board, perhaps the same model.
Early station was under the federal radio commission, before the FCC by a few years.
Will try to get some of this stuff working.
What does the matching transmitter look like?.
Everybody I talked to said there was no portable TX, just mobile and base, but we are talking as much as 75 years ago, perhaps someone remembers.

Thank You.

Thank You.

Posted: Sat Oct 27, 2001 4:21 pm
by Cowthief

Posted: Sat Oct 27, 2001 4:38 pm
by Cowthief
Hello.

Have one working, transmit 2.1 MHz, AM, around 3 wattts, Rec, all of the normal AM, but by setting the "coil" pointer 'band-select' one can go to around 4 MHz top end.
No EL caps, just paper and mica, some, if not all, were replaced before.
Because the mobile was fixed several times before I decided to try and make it work.

The portable "pager" however, seems to be all original, should I even try to repair it
?, I have not even tried to apply power.
I have all the parts that were taken out of circuit from the mobile as well as some "new" old parts, mostly strange old stuff.

Posted: Sat Oct 27, 2001 6:14 pm
by radioEd
Operating in the FIXED MOBILE part of the band! but 70 years ago? hum? Maritime Mobil?
http://www.ntia.doc.gov:80/osmhome/allo ... octbl.html

Here's a good link...Ed

Posted: Sun Oct 28, 2001 10:39 pm
by Cowthief
Hello.

The transmitter is now on 160 meters, just had to figure things out, what it was on to begin with?, who knows, remember, no "rocks"

The RX, very poor, no image reject, sens, .9 just to HEAR a signal, This silly thing runs AM!, when was sideband invented?.

This is a Automobile-Mobile Radio Outfit, Galvin MFG, Chicago, Ill.

Patent 1927,29,30,31, Marcas Registras US, This unit under permit.

This unit has a wafer lock, single sided key, unlocked, no key.

Burgess battery B and C, for maximum life and best tone.

There are lots of things to learn, like a type 80 tube?.
Is that a house number?.

Thank you.

Posted: Sun Oct 28, 2001 10:49 pm
by Cowthief
P.S.

All tubes are large, full octal, nothing in this thing gets anything close to miniture.
Transformers, everywhere, input, output, even the speaker has 2 sets of coils, the voice coil, yes, but also one in the back.
This thing is strange from the start, even the antenna connect, a wingnut!.
Anybody have any idea as to where I can find info?.
My guess, this stuff is smithsonian relics that got away.

Posted: Mon Oct 29, 2001 2:12 am
by radioEd
Found this:
http://www.ieee-uffc.org/fc_history/bot ... k390358083
...interesting reading, It mentions Chicago,Detroit, and goes on? no clues! Take some pic's of it & send it to a contact above! Ed


<font size=-1>[ This Message was edited by: radioEd on 2001-10-29 05:14 ]</font>

Posted: Mon Oct 29, 2001 8:34 am
by Cowthief
Hello.

Neat reading, however, there are no quartz crystals.
The portable has its freq set with an internal air-variable cap, little nut on the end.
The mobile has a control head that is mechanical for tuning, this can set RX, TX might have also been set by it at one time, now fixed by what looks like add-on air-variable "condensers".
Only the portable has some markings, might be detroit, on the leather case.
The mobile unit has a stamped metal plate, Galvin '''''''.
The units might not be in the same era, however, was told they were part of the same radio system.
After WWII, they went to 44.3 MC, around the 50s they went to FM, around the mid 60s they went to "narrow band?" FM at 44.34 MHz.
This all got started because of some Geotek units, I was told that "this will keep you occupied for a while", told NOT to mess with Geotek whatsoever, Sooo.

P.S. Removed the leather a little, a very rusted metal plate is on the back, the leather cracks very easily, will not go further.
I have access to a sony movica digital camera, but the pix are stored on some non-standard format, I will try next month, going out for the month.

Thank You.

Posted: Mon Oct 29, 2001 10:33 am
by radioEd
Mess with Geotek? I heard or saw here on the BBS that Nextell bought Geotek out? Ed

Posted: Mon Oct 29, 2001 1:09 pm
by Cowthief
The prob' is that we use what was Geotek, now Nextel, and I keep "cracking" things.
Security support 'FBI' is now a bit concerned, we transport hazmat to controlled areas, we use qualcomm omnitracs units as well as immersat, both for tracking and to communicate, as well as low band FM,normally, my forays into the radios draws no attention, but 9/11/01,,,,,.

Posted: Mon Oct 29, 2001 5:24 pm
by radioEd
Yep! I see your point...keep us posted on your findings of that unit! Ed

Posted: Mon Oct 29, 2001 7:14 pm
by Tron
If memory serves me, an 80 tube is a rectifer, 4 pin. I'll have to check out one of my old tube manuals for more info.

Tron

Posted: Mon Oct 29, 2001 8:57 pm
by Cowthief
Hello.

Found a guy selling SCR536 radios.

The radio is the model right before the police cruiser,

"1936
The Police Cruiser mobile radio, a redesigned car radio preset to a single frequency to receive police broadcasts, is the company's first entry into the new field of mobile radio communications.

http://www.motorola.com/General/Timeline/1930.html

So far, this has been a real learning curve.
Dispatch was right above tha AM broadcast band, some early broadcast radios even have markings for the "police band".
Transmitters that were mobile were very uncommon, the transmit antenna was a very long whip, RX was done with a screen mounted in the roof, wooden,remember?.
The type 80 was replaced with selenium rectifiers, later a vibrator, this all is in the battery box, originally there were 3 sets of batteries, "A" , "B", and "C".
The unit has had some mods, but for the most part as shipped.
The question is, was the TX freq normally preset, or, is the steel bracket with a air-viriable cap a later add-on.
The reason I ask, there looks to be a place for a splined shaft, nothing more.

I am learning about the "command" series of radios of WWII fame, but this is clearly not military in nature.

Thank You.

P.S. this thing is old enough to be grandparents!.

Posted: Mon Oct 29, 2001 9:07 pm
by radioEd
Nice work Cowthief! Yep so my grandpa was right too. In upstate NY The Police did operate just above the AM broadcast band! Most likly btw. 1600Kc & 160meters! And they did have antennas that were 100 inchs tall plus! good dectecive work cowthief! Ed

Posted: Tue Oct 30, 2001 3:40 pm
by Cowthief
Hello.

took me a while to figure this out, there are 2 radios!, they share a common power supply, one is a motorola broadcast+model, the other is indeed a police cruiser model, the idea was to allow one to both use the radios for RX, one for TX and the other for RX, duplex?.
This was a common "outfit" for chief and other high ranking people of the era.
This is the first one control head, 2 radios ever made by anyone, motorola or other.

Posted: Tue Oct 30, 2001 5:05 pm
by Cowthief
Hello.

Now that I know what this is, the question is, what is motorolas policy on RSS?.

Actually, this unit made it past WWII scrap heaps because it could not be replaced, after the war, the trucking co replaced its fleet, this unit was put in a box, then left for lots of years, the police had use of this type of radio, in fact this is where I am finding most everything out, the 2 radios are something put together.

I will work on getting pix, as well as scans of "riders" manuals of the things, this, the first of motorolas long line of 2 way radios.

Thank You.

Posted: Tue Oct 30, 2001 6:18 pm
by Cowthief
Thanks to all the people who have helped.

http://www.qsl.net/n6uru/calling.htm

Gives a very complete answer.
Radio 1, right above the AM broadcast band,RX, AM, very low power, TX.
Radio 2, AM, around 1.5 watts, 32+/- MHZ
Radio 3, AM also above the AM broadcast band.

If you listen to the audio of the website, you will hear about the " Radio Police ", :wink:

Again, Thanks EVERYBODY who has been most helpful.
P.S. solid state "vibrators" can be had,

http://www.antiqueautomobileradio.com/who.htm

Again, THANK YOU.

Posted: Tue Oct 30, 2001 6:19 pm
by Cowthief
Thanks to all the people who have helped.

http://www.qsl.net/n6uru/calling.htm

Gives a very complete answer.
Radio 1, right above the AM broadcast band,RX, AM, very low power, TX.
Radio 2, AM, around 1.5 watts, 32+/- MHZ
Radio 3, AM also above the AM broadcast band.

If you listen to the audio of the website, you will hear about the " Radio Police ", :wink:

Again, Thanks EVERYBODY who has been most helpful.
P.S. solid state "vibrators" can be had,

http://www.antiqueautomobileradio.com/who.htm

Again, THANK YOU.

Re: Really OLD Motorola pager

Posted: Tue Oct 24, 2017 5:02 am
by Bat Bob
If anyone still needs a vibrator I found one for 25.00 on the link below. Mine was a 6 volt positive ground so I had a bit difficult time finding one until I located these guys.

http://www.vintagecarradio.com/accessor ... adios.html

Re: Really OLD Motorola pager

Posted: Wed Oct 25, 2017 3:13 pm
by NSPD
Bat Bob wrote:If anyone still needs a vibrator I found one for 25.00 on the link below. Mine was a 6 volt positive ground so I had a bit difficult time finding one until I located these guys.

http://www.vintagecarradio.com/accessor ... adios.html
16 Years Later :o

Re: Really OLD Motorola pager

Posted: Wed Oct 25, 2017 4:51 pm
by Jason
Yep, I think that wins the Lazarus Post :o

Re: Really OLD Motorola pager

Posted: Thu Oct 26, 2017 7:31 am
by d119
No kidding... Not to mention Cowthief was identified as a genuine mental case some time ago, so who knows how accurate anything he says is/was.

Re: Really OLD Motorola pager

Posted: Thu Oct 26, 2017 4:22 pm
by Satelite
Yeah the post may be old but a NEW MEMBER did a search and found it because he had an old vibrator he was letting us all know about.
And I bet postee wasn't around when cow thief pulled his crap which means he wouldn't have a clue about cow thief.
So why dump on him ?
My feeling is welcome to the bd Bat Bob and appreciate the fact you did some search .
Many here complain when some one asks something you could had found with a search and they'll complain you didn't and say so.
I haven't a clue why some need to be that way but hey so be it.
Just remember who and don't bother posting for them since they obviously aren't posting to help you.
Again WELCOME TO THE BD BAT BOB.
Didn't used to be this way = way back during monty scisco time the bd I recall got along much better.
Satelite

Re: Really OLD Motorola pager

Posted: Thu Oct 26, 2017 4:58 pm
by NSPD
Satelite wrote:Yeah the post may be old but a NEW MEMBER did a search and found it because he had an old vibrator he was letting us all know about.
And I bet postee wasn't around when cow thief pulled his crap which means he wouldn't have a clue about cow thief.
So why dump on him ?
My feeling is welcome to the bd Bat Bob and appreciate the fact you did some search .
Many here complain when some one asks something you could had found with a search and they'll complain you didn't and say so.
I haven't a clue why some need to be that way but hey so be it.
Just remember who and don't bother posting for them since they obviously aren't posting to help you.
Again WELCOME TO THE BD BAT BOB.
Didn't used to be this way = way back during monty scisco time the bd I recall got along much better.
Satelite
Relax man.. nobody is dumping on him. It’s just amusing to see a thread with 16 year old cowthief shenanigans suddenly appear again.

Re: Really OLD Motorola pager

Posted: Fri Oct 27, 2017 8:53 am
by d119
Satelite wrote:Yeah the post may be old but a NEW MEMBER did a search and found it because he had an old vibrator he was letting us all know about.
And I bet postee wasn't around when cow thief pulled his crap which means he wouldn't have a clue about cow thief.
So why dump on him ?
My feeling is welcome to the bd Bat Bob and appreciate the fact you did some search .
Many here complain when some one asks something you could had found with a search and they'll complain you didn't and say so.
I haven't a clue why some need to be that way but hey so be it.
Just remember who and don't bother posting for them since they obviously aren't posting to help you.
Again WELCOME TO THE BD BAT BOB.
Didn't used to be this way = way back during monty scisco time the bd I recall got along much better.
Satelite
Jesus Christ, Satelite... As usual you are jumping to conclusions.

I merely made a statement about why the post may seem weird. I was not jumping on the OP at all, and I think you are probably the only one who thought I was.

I don't see anyone here on the board "not getting along", I think that exists only in your head. Seriously man - you misinterpret a LOT of stuff. No disrespect, just an observation.

That is all I have to say about that, carry on.

Re: Really OLD Motorola pager

Posted: Fri Oct 27, 2017 8:54 am
by d119
NSPD wrote:Relax man.. nobody is dumping on him. It’s just amusing to see a thread with 16 year old cowthief shenanigans suddenly appear again.
Where is the "Like" button... :)

Re: Really OLD Motorola pager

Posted: Sun Oct 29, 2017 3:58 pm
by com501
-Wait- Cowthief is gone?? :roll:

Re: Really OLD Motorola radio history

Posted: Mon Oct 30, 2017 7:37 am
by Jim202
Here is a link to some of the original history in how Motorola came to be.
https://www.motorolasolutions.com/en_us ... eline.html

This is another link that has a slightly different view on the history.
https://en.wikipedia.org/wiki/Motorola

Here is a third link on the development of Motorola and the different roads it headed down. But there are a number of popup adds to distract you.
https://www.britannica.com/topic/Motorola-Inc

Jim

Motorola history

Posted: Mon Oct 30, 2017 7:58 am
by Jim202
My last update posting on some of Motorola History. This one has more to do with the management of the company and what changed.
http://www.chicagomag.com/Chicago-Magaz ... -Motorola/

Those of us that have been around for some time have seen many of the changes that have taken place with Motorola and the radio equipment that has come down the line over the years. At one point in time I was lucky enough to have taken a class on the Motorola campus. The last day of the class included a tour of the museum on the first floor of the building. There you saw each and every box or device Motorola ever made. the older man that was leading us around the room kept asking if anyone knew the name that each of the displayed devices had. Starting with the mobile radio "Dog House", I surprised him by saying that I had worked on those. Even told him they used loctal tubes. He was surprised.

Sorry to slightly steer the thread into the history of the different radios made, but you may find the different radios that the different company names over the years interesting.

Jim