Page 1 of 1
Power up of CDM1550
Posted: Sun Dec 02, 2007 11:47 pm
by KMB
Hello,
I am new to CDM1550, do I need to find any "adoptor" or "jumper" at the back of the radio to power up the radio like Specrtra?? As I find there is a cord other than the one have 2-head power cord.
What is the P/N?
or I can make one by hand??
Thank you!
KMB
Re: Power up of CDM1550
Posted: Mon Dec 03, 2007 6:19 am
by libuff
find a 16 or 20 pin connector, then feed +12v into Pin #10, accessory, that is, a +12v switched with the iginition key, NOT hot all the time.
HLN9457 is the part number i believe, although i am referencing an ebay auction
Re: Power up of CDM1550
Posted: Mon Dec 03, 2007 8:07 am
by KMB
I saw a part number HN9327 Ignition Sense Kit on eBay, does it work with CM1550?
And how about the external speaker for CM series? Does it have ignition pin like the ignition sense kit?
Thank you!
KMB
Re: Power up of CDM1550
Posted: Mon Dec 03, 2007 9:37 am
by HLA
the ignition sense is the same for the cdm750, 1250, and 1550. it is pin 10 on all of them and you have to turn on the function in the cps so the radio knows to sense for it.
Re: Power up of CDM1550
Posted: Mon Dec 03, 2007 4:46 pm
by KMB
Thank HLA.
I just bought one ahd I plug the 2-head main power cord to the radio but it does not power up. Is it already set in CPS that it need ignition sense?
Thank you!
KMB
Re: Power up of CDM1550
Posted: Wed Dec 05, 2007 5:20 pm
by KMB
Successfully power up!
Thanks all of your help!
KMB