Batboard

i am having trouble tring to read the radio the computor said to check the rib box to see if it has power and it do have power just wondering if somone could help me out.

Give us some more info on your setup, like computer type/speed, RSS version, OEM/aftermarket RIB, OEM/aftermarket/homebrew cable, etc.

Note: Maratrac uses the same cable/RIB that Maxtrac radios use.

kf4sqb wrote:Give us some more info on your setup, like computer type/speed, RSS version, OEM/aftermarket RIB, OEM/aftermarket/homebrew cable, etc.

Hi yes the rib box is a aftermarket i am useing a dell laptop pc the radio is in the late 89 to 91 it is a 18ch radio. I dont understand what i am doing wrong. the lap top i am useing is about 7 years old. thank you for your help hope to hear from u soon

still not enuf information on your setup? first start your computer in dos, not windows. next run your rss and check the port assignment. plug the rib into the 232 port and plug your cable into the radio and rib then read the radio.

When I say computer type/speed, I mean the specs of the processor, like series (Pentium/II/III/IV, Athlon, Celeron, etc.), and speed (75, 90, 500, 1500 MHz, etc.).This is very important, as it tells which versions of RSS will/won't work with your computer. What operating system are you using (DOS, Win95, WinME, WinXP, Vista, etc.)? Does your computer have a serial port, or are you trying to use a USB to serial adapter? What version of RSS are you trying to use? It will tell you on the first screen that opens when you run the RSS. It should say something like "version R03.04.00", and have a date listed. Give us both.

Go into F9 F3 computer setup and try setting it for a different com port.