ASTRO SABER DTMF Enable

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
n3vth
New User
Posts: 3
Joined: Thu Oct 25, 2007 5:51 pm

ASTRO SABER DTMF Enable

Post by n3vth »

I have an ASTRO SABER model HO4KDH9PW7AN Serial Number 465AYLL0383. I have been attempting to activate the DTMF so I can utilize it on our repaeter. I have had no luck in going in through the phone commands. Does anyone have a step by step tree of commands so I can enable the DTMF? Thanks in advance.
User avatar
Tom in D.C.
Posts: 3859
Joined: Tue Sep 04, 2001 4:00 pm
What radios do you own?: Progreso soup can with CRT

Re: ASTRO SABER DTMF Enable

Post by Tom in D.C. »

1. First, check to make sure your radio is not an AS2 in an AS3 case.

2. Under each conventional personality, make sure that the box for
"hot keypad" is checked. They should have called this function "enable
keypad" but "hot" takes up less space, I guess.

That SHOULD do it. If not, yell for help again.

Regards,
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
n3vth
New User
Posts: 3
Joined: Thu Oct 25, 2007 5:51 pm

Re: ASTRO SABER DTMF Enable

Post by n3vth »

Thanks, Tom that worked. Apperciate it.
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”