Page 1 of 1
Ribless MTS2000 Cable
Posted: Fri Feb 01, 2008 10:04 am
by ajs007
First off i did a search and found nothing relating to this
Found this on ebay will it work do i need anything else i have a mts2000 & rss 6
Item number: 190190096351
http://cgi.ebay.com.au/Programming-Cabl ... dZViewItem
Re: Ribless MTS2000 Cable
Posted: Fri Feb 01, 2008 1:36 pm
by Terry_Glover
If you want to go the cheap cable route, yes, you will have everything you need.
You have the radio, RSS, cheap HongKong ribless cable and a computer that you can boot into DOS for the software.
Good luck with that cable. I hope it works for you...
Re: Ribless MTS2000 Cable
Posted: Fri Feb 01, 2008 2:28 pm
by n1oty
I can vouch for the ribless cable from Wiscomm. I don't know where his cables are made. They may or may not be domestic production, but everyone I talked to said they were good quality and wouldn't hose my radio's. They were right. Excellent cable.
John
N1OTY
Re: Ribless MTS2000 Cable
Posted: Sat Feb 16, 2008 7:15 am
by ajs007
Hey just to let you all know i got the cable and it works like a charm
Very happy
Re: Ribless MTS2000 Cable
Posted: Sat Feb 16, 2008 8:41 am
by hman710
I noticed the one you showed has a box with 2 LED's connected to it. The one I got doesn't have the box but works nonetheless. Does that cable use a power source?
Re: Ribless MTS2000 Cable
Posted: Sat Feb 16, 2008 4:05 pm
by Terry_Glover
There are a couple of different styles of these. Yours doesn't have a box or LEDs, but it has the equivilent electronic components inline in the cable connestor.
Neither requires an external power supply.