Batboard

Hi Guys,

i have a little Question about the M110, i have read some Information here about VCO Bandwith of the M110.

But there are different Informations......in one Thread there is written that the Bandwith is 10 Mhz ( so that means +/- 5Mhz)

and in another one is it +/-10 Mhz (that means then 20Mhz)

What is the correct Information?

Thank you very much

kindly regards
Jörg

Check the model number of your M110 against the radio specifications
shown at this site.

http://www.batlabs.com/micro.html

By adding 2 smd capacitors you can lock in the entire radio band (tested on VHF models) - not a hard job.
If interested, let me know.

Paul