Page 1 of 1

Astro Spectra W9 boot fail

Posted: Sat Feb 09, 2008 12:28 pm
by Carl
hi,
i just received a VHF W9 Astro Spectra and it don't want to open properly. Everything was tested with 3 different astron power supplys. I connect the orange and green wire comming from the remote head to the + on the power supply. The ON/OFF switch on the head is at on, the only thing happen is the radio backlights and option buttons open and 2 seconds after everything close. the display also do the same. What it can be ?

Re: Astro Spectra W9 boot fail

Posted: Sat Feb 09, 2008 1:11 pm
by The Pager Geek
inhibited?

Re: Astro Spectra W9 boot fail

Posted: Sun Feb 10, 2008 1:24 pm
by Will
No power to the radio.

Re: Astro Spectra W9 boot fail

Posted: Sun Feb 10, 2008 7:00 pm
by Jim202
Like Will indicated, you need to add the =12 volts to the heavy power cable going to
the radio. Without it, the radio will not power up.

Jim


Will wrote:No power to the radio.

Re: Astro Spectra W9 boot fail

Posted: Sun Feb 10, 2008 8:37 pm
by akardam
Will wrote:No power to the radio.
If that were the case I'd expect the head to throw a Fail 01/90. It's obviously got enough of a ground to let some power flow through the head.

To the OP, do you have another head, another drawer, or another set of cables you might try, as a process of elimination? Might also be helpfull to post the model and other information shown on the radio body.

Re: Astro Spectra W9 boot fail

Posted: Mon Feb 11, 2008 1:53 pm
by Carl
that was a radio inibit, go back to the man who sold me this and get refunded. Problem solved, thanks !