Batboard

FOLKS

We just installed a cdm1550ls+ in our dispatch area as a control station/ backup to our console. the cdm is set up to acknowlidge/reset the MDC1200 emergency. The problem is that when it recieves an emrergency you must power cycle the radio to reset the alarm, my question is: Would it be possible to use one of the accessory pins and a momentary switch of some sort to reset the alarm without power cycling the radio?

thanks

Radiogeek97 wrote:FOLKS

We just installed a cdm1550ls+ in our dispatch area as a control station/ backup to our console. the cdm is set up to acknowlidge/reset the MDC1200 emergency. The problem is that when it recieves an emrergency you must power cycle the radio to reset the alarm, my question is: Would it be possible to use one of the accessory pins and a momentary switch of some sort to reset the alarm without power cycling the radio?

thanks

We had the same thing come up, and in the end we just had to reset the power to the radio.

Jim

Hooray for the search feature!!

http://batboard.batlabs.com/viewtopic.php?t=13737

Step by step how to reset it without any external switches.

Todd

todd

thanks for taking the time to do a more thurough search than I did Thank you! I will try this and let you all know