Batboard

Can you take a 4 channel HT750 and make it to 16, was just curious because of my experience with the HT600 radios were you removed the stopper and the rotary would continue aruond.
Thanks for any help.
Andy

SOC wrote:Can you take a 4 channel HT750 and make it to 16, was just curious because of my experience with the HT600 radios were you removed the stopper and the rotary would continue aruond.
Thanks for any help.
Andy

Nope, buy a 16 channel radio.

OK>? It was just a question not to be reacted by "buy a 16 ch radio"

It is possible, but would require a new switch, and hacking the radio into a 16ch. The software to do so is not legal, and hard to find. So in short buy a 16ch radio, it will be easier. By the time you buy a new switch, escutcheon, knob, find the software, figure out how to make it do what you want, retune the radio when you are done, it would have been easier to sell your radio and buy a 16ch.

Thanks that makes more sense@! Now, for some more advice, what should i ask for my 4 channel unit and what should i expect to pay for a 16 channel unit? i know i can find them on ebay cheap but id rather find a real nice that can come already progarmmed.Thanks

I don't really know, on ebay it looks like used ht750 are going for 150-250 depending on vhf or uhf and channel number. I would say you should be able to get into a 16ch for less than 100 plus what you get for yours. Check the for sale, trade here to get some ideas also.

why don't you look for a ht1250 so you won't have to go thru this again when you want more than 16ch? a ht1250 won't cost much more and all acessories and cps is the same.

Really, dont know much about the 1250s, seen them on ebay, do you know anyone on here that can program them? i usually just buy what i can get programmed.
Thanks

ya, i can program it for you and so can probablly most on here.

OP's question has been answered.