Page 1 of 1
XTS3000 Trunking ID Display
Posted: Tue Mar 25, 2008 10:25 pm
by ayaresr
Anyone know what needs to be configured for an XTS3000 to display trunking id's? I have been beating my head into a wall here and getting nowhere.
Thanks
Re: XTS3000 Trunking ID Display
Posted: Tue Mar 25, 2008 11:55 pm
by n7maq
ayaresr wrote:Anyone know what needs to be configured for an XTS3000 to display trunking id's? I have been beating my head into a wall here and getting nowhere.
Thanks
What is your flashcode? IIRC you need to have digital ID to be able to display the trunking ID's. So you want your flash to start with a 5.
Jim
Re: XTS3000 Trunking ID Display
Posted: Wed Mar 26, 2008 4:08 am
by Hightower
ya, what n7mag said, also....
under Display & Menu --> PTT ID, make sure ID Display is checked along with Scan ID Display and if needed, AnalogTrunking ID Display
Re: XTS3000 Trunking ID Display
Posted: Wed Mar 26, 2008 6:42 am
by ayaresr
My Flashcode is: 591008-4F1E00-9.
I thought I had all of those checked, but I will look again to be sure...thanks guys!
Re: XTS3000 Trunking ID Display
Posted: Wed Mar 26, 2008 9:06 am
by Code3
If you are trying to display analog trunking IDs you firmware must be greater than R7.22.01
Re: XTS3000 Trunking ID Display
Posted: Tue Feb 24, 2009 6:22 am
by caprice96
Will it work if you have the 9600buad trunking firmware in the radio. I have a XTS3000 with r06.71.00. The flashcode does have ID display in it.
Re: XTS3000 Trunking ID Display
Posted: Wed Feb 25, 2009 7:39 am
by Pj
50/50, but my guess is most likely not.