Batboard

Hello

I need help in waris lab tool

I open waris lab
connect rib flash adapter and original cable
open firmware
adapter in position "A"
procced program firmware
MESSAGE NOT in BOOTSTRAP MODE
swith adapter to "B" remove battery and reconnect
procced to program
MESSAGE FL0 download failed

What is the correct process to it?

Thank
Florencio

you don't need lab, which you are not supposed to have to begin with, to update firmware. download the newest firmware for your radio, it's a stand alone program, and run that and it will prompt you with directions on what to do and when to do it. the real big question is if your cable has the boot line in it capable of booting the radio? when you are asked to remove and replace the battery does the radio power back up or play dead?

Hi

Thank for anwer

My interest no is update firmware, i need change conventional radio UHF in trunking LTR radio in uhf, is correct i enter the radio in bootstrap, (ident for update firmware)

I need tutorial or intruction for it in waris lab

Do you have information?

Thank you

someone else correct me if i'm wrong but that won't work, you need an ltr radio, the insides are different