Hi all!
Any way to to force Saber to make sounds at the scan beginning/resuming and cancelling?
It, for example, is conveniently made in WARIS radios - 4 beeps at the beginning/resuming, and 4 boops at a cancelling.
But I ASIII at such operations remains completely silent :(
I have examined CPS, but have not found the necessary options.
Any ideas?
Sounds on Astro Saber at scan beginning/resuming/cancelling
Moderator: Queue Moderator
- MotoFAN
- Posts: 1054
- Joined: Thu Jun 28, 2007 6:46 am
- What radios do you own?: Approx. 50: Moto & Kenwood
Sounds on Astro Saber at scan beginning/resuming/cancelling
I am biggest fan of XTS2500 and ASTRO Digital Saber.
Re: Sounds on Astro Saber at scan beginning/resuming/cancelling
If your using the A/B switch, you will not hear a sound...unless you enable the pri scan alert tone which will only make a sound when your pri channel is active.
Aside from that, you can program one of the buttons as your scan on/off, and that will make a single beep when you enable/disable scan.
The only ASTRO radios that I have heard anything other than the beep are the XTL's with recent firmware that gives you a high/low - low/high sound when its turned off/on.
So, the short answer is no.
My HT1250 (with current firmware) will only give a low/high - high/low sound when scan is turned on/off. Never noticed that it could do a 4 beep sound on the on/off, and never heard one that did (doesn't mean that it can't, just never heard one since they have been out).
Aside from that, you can program one of the buttons as your scan on/off, and that will make a single beep when you enable/disable scan.
The only ASTRO radios that I have heard anything other than the beep are the XTL's with recent firmware that gives you a high/low - low/high sound when its turned off/on.
So, the short answer is no.
My HT1250 (with current firmware) will only give a low/high - high/low sound when scan is turned on/off. Never noticed that it could do a 4 beep sound on the on/off, and never heard one that did (doesn't mean that it can't, just never heard one since they have been out).
Lowband radio. The original and non-complicated wide area interoperable communications system


- MotoFAN
- Posts: 1054
- Joined: Thu Jun 28, 2007 6:46 am
- What radios do you own?: Approx. 50: Moto & Kenwood
Re: Sounds on Astro Saber at scan beginning/resuming/cancelling
Year, I have used A/B switch fot it...Pj wrote:If your using the A/B switch, you will not hear a sound...
It not that I want :)unless you enable the pri scan alert tone which will only make a sound when your pri channel is active.
It's the same for beginning/resuming/cancelling? Or different?Aside from that, you can program one of the buttons as your scan on/off, and that will make a single beep when you enable/disable scan.
XTS2500/XTS5000 also can't do what I want?!?The only ASTRO radios that I have heard anything other than the beep are the XTL's with recent firmware that gives you a high/low - low/high sound when its turned off/on.
Sorry, I mean EMEA Waris aka GP300/GM300 Professional Series, for e.g. GP340. They sounds as is described by me.My HT1250 (with current firmware) will only give a low/high - high/low sound when scan is turned on/off. Never noticed that it could do a 4 beep sound on the on/off, and never heard one that did (doesn't mean that it can't, just never heard one since they have been out).
I am biggest fan of XTS2500 and ASTRO Digital Saber.