Batboard

I have got a GR300 Repeater that has 2 GM300 Radio's and a Zetron ZR320 Selective Calling Interconnect in it as a controller. I'm getting ready to Upgrade the Radio's with CDM750's, will this Zetron Controller work with the CDM Series Mobiles without and Problems???

Thanks

Mikey

I have been out of the Moto business for about 4 years, so my "help" may not help. I can tell you how to find out, but only if you have the RSS for the GMs, and the CPS for the CDMs. And if my memory serves me , the plugs on each radio is physically the same. In each of the programming softwares, there will be a place where the pinouts of that connector is defined. There is where you will find the answer. If they can be configured the same, it should work Good luck.