Batboard

Does anyone have the dipswitch settings for the I50R used in the GR300 Repeaters.
Specifically looking for the drop-out delay or "hang time" setting(s).

SwB
#1 Dropout delay enable (transmitter only)
Off = No repeater dropout delay
on = enable repeater dropout delay
#2 Dropout delay length:
Off = 3 second dropout time
On = 1.5 second dropout
Will,
If you need the rest of the parameters let me know and 'll type them out and get them to you SwA mainly refers to the patch operation and Swb deals with the repeater aspects of it
Doug

Doug,

Thank you, Sir...