Page 1 of 1
Minitor V Squelch Level
Posted: Fri Apr 25, 2008 3:19 am
by Gigs
In the programming of the Minitor V, it shows a Squelch Level Bar from 1 to 5, with 3 being default. Can someone tell me which way I need to move it (towards 1 or 5) to "make it pick up weaker signals". At my work, it barely opens up and thinking that if I tweak the squelch to allow it to pick up better, that may work. THANKS
Re: Minitor V Squelch Level
Posted: Fri Apr 25, 2008 6:33 am
by Mfire39
Try 1 or 2 and see what happens... The higher the number, the tighter the squelch will be.
-Marc
Re: Minitor V Squelch Level
Posted: Sat Jan 08, 2011 1:35 pm
by northstarfire0693
Mfire39 wrote:Try 1 or 2 and see what happens... The higher the number, the tighter the squelch will be.
-Marc
Ok I know this is old. So if I am reading this right 1 is loose and 5 is tight ? I have also seen it go the other way around 5 lose and 1 tight.
So what is the real deal with the setting or does it depend on what cps ver your using ?
Re: Minitor V Squelch Level
Posted: Sun Jan 23, 2011 10:53 pm
by northstarfire0693
Bump,bump