Page 1 of 1
XTVA HHCH buttons won't function
Posted: Wed May 28, 2008 1:21 pm
by motorola_otaku
Is this normal? None of the front keypad, menu, volume, or mode buttons do anything but bonk. PTT and display work normally.
HHCH is a PLN7737B, XTVA is a NTN8560D, and the radio is a XTS3000 H09RDH9PW7AN, HOST 07.00.01/DSP N07.03.12
Re: XTVA HHCH buttons won't function
Posted: Wed May 28, 2008 1:54 pm
by spectragod
They will need programmed in CPS or RSS for the function that you want them to do.
SG
Re: XTVA HHCH buttons won't function
Posted: Wed May 28, 2008 2:18 pm
by resqguy911
I have never seen any button selections in CPS other than the top and side buttons on the HHCH, front panel should mimic normal radio operations.
Re: XTVA HHCH buttons won't function
Posted: Thu May 29, 2008 7:56 am
by motorola_otaku
Yeah, I know the top & side buttons need to be programmed, but nothing on the front works either and there is no option to enable/disable those. Kinda annoying since I can't adjust the volume and it defaults to quiet.
Also, I tried a 5K VHF with R11 firmware and a 5A0001 codeplug and it worked perfectly (aside from no FPP through the HHCH, but oh well.) So I guess that points to the HOST firmware or the 1C5E codeplug in the UHF 3000.
Re: XTVA HHCH buttons won't function
Posted: Thu May 29, 2008 8:53 am
by spectragod
See what I get for skimming your OP. I didn't realize the volume and front buttons didn't work.
Sounds like it's the flash in the radio that has things askew, the FW should be new enough.
SG