Page 1 of 1
HT1000 tone over the air at the end of transmission
Posted: Wed Jun 11, 2008 3:27 pm
by 4-crime
Can anyone tell me how to program an Ht1000 to have a tone chirp over the air at the end of a transmission?
Re: HT1000 tone over the air at the end of transmission
Posted: Wed Jun 11, 2008 6:18 pm
by HLA
that would be your mdc identifier, set it up for post signaling on the channels you want it on and set the 4 digit number for your badge number or whatever number your department assigned to you or whatever number you want to show up on everyone elses radio.
Re: HT1000 tone over the air at the end of transmission
Posted: Wed Jun 11, 2008 6:27 pm
by 4-crime
Ok, thanks for the help. But could you tell me in depth how to do this with the ht1000 software like what options do i go to on the rss software?
Re: HT1000 tone over the air at the end of transmission
Posted: Thu Jun 12, 2008 9:33 am
by HLA
open your ht1000 rss owners manual that came with your rss and it will explain it in great detail.
Re: HT1000 tone over the air at the end of transmission
Posted: Fri Jun 13, 2008 9:02 pm
by Cowboy
- F4 - Change/View Radio Codeplug Data
- F3 - Radio Configuration Menu
- F7 - Signalling Options Menu
- F3 - MDC/STAR/ATIS Options
Signalling Type - MDC1200
Primary ID - Given to you by administrator
Variable ID - Given to you by administrator
PL Transmit - Depends on system
PTT ID - Keyup, Dekey or Keyup/Dekey *under Dekey, the radio will transmit a data burst at the end of each transmission
Reading the manual that came with your legitimately obtained copy of HT1000 RSS will be incredibly helpful - the F1 Help file text is practically a limited Cliff Notes version of the actual manual.