Batboard

Can you help me?
I need correct pin out of this power supply and, if possible, a schema.

Thanks a lot

Max

Hi Guys,

have the same GPN6101A, does anyone now anything about this item??
There ist a 6pin Connector in the front, for what type of radios is that. The Pinout is needed cause there is a fuse with 2.5A
but the whole think has this specifications 13,6V 130VA-


Thanks Georgeman

You should be able to figure it out pretty quickly with any decent multimeter.

The 2.5A fuse is most likely the AC line fuse...

If I remember, there is 120 volts AC line on the connector for on-off switching.

These trimmers seem to adjust the output voltages:
http://personal.inet.fi/koti/juha.nurmela/S6302307.JPG

Both did reach 13.8v
Juha