Page 1 of 1
Probably a big programming problem with my CDM1550 LS
Posted: Wed Jul 30, 2008 9:08 pm
by KC9LDB
Its a remote mount AAM25SKF9AA5AN with the version number of R05.02.03 last programmed with Depot RSS
The code plug version is 02.21 for the orgional and latest (what I used)
I used CPS R06.04.00
The problem is "Image is Corrupted. Checksum for R/W region failed
The Head will say EEPRM CSERROQ or something......
Any thoughts??
Re: Probably a big programming problem with my CDM1550 LS
Posted: Thu Jul 31, 2008 5:14 am
by ve3nsv
If you have a good archived codeplug you can always try programming and reviving the radio with that. If not it will most likely mean a trip to the depot.
KC9LDB wrote:Its a remote mount AAM25SKF9AA5AN with the version number of R05.02.03 last programmed with Depot RSS
The code plug version is 02.21 for the orgional and latest (what I used)
I used CPS R06.04.00
The problem is "Image is Corrupted. Checksum for R/W region failed
The Head will say EEPRM CSERROQ or something......
Any thoughts??
Re: Probably a big programming problem with my CDM1550 LS
Posted: Thu Jul 31, 2008 6:02 am
by KC9LDB
No good, this is my 1st time programming the radio, i never had any other data nor did i back it up. What exactly is a codeplug anyway?
Re: Probably a big programming problem with my CDM1550 LS
Posted: Thu Jul 31, 2008 7:16 am
by Victor Xray
Your problem probably is due to the OLD OLD version of your software. Purchase the newest software version from Motorola.
Re: Probably a big programming problem with my CDM1550 LS
Posted: Thu Jul 31, 2008 12:12 pm
by a_j_b
I highly recommend you only program it from the 20pin in the back of the radio. Remote heads cause havoc.
Re: Probably a big programming problem with my CDM1550 LS
Posted: Thu Jul 31, 2008 1:33 pm
by KC9LDB
Does anyone have a codeplug for this radio?
Re: Probably a big programming problem with my CDM1550 LS
Posted: Thu Jul 31, 2008 6:16 pm
by Al
if you search here for "codeplug supersite", you'll see:
http://www.codeplugsupersite.com/
Take a look there and see if what you're looking for is available.
Re: Probably a big programming problem with my CDM1550 LS
Posted: Fri Aug 01, 2008 6:18 am
by KC9LDB
Al- YOU ROCK!!! works like a charm thank you so much!!!!
Joe