CM300 MDC1200 issue
Posted: Sun Aug 17, 2008 8:13 pm
UHF CM300 BRAND new. Programmed by dealer who radio was bought from, then checked by a friend who has s/w.
MDC1200 is set for decode on one channel, both individual ID (1598) and group ID (610).
When paging the radio: Works when paging the individual unit, but not group. Any ideas??
Could it be selective call vs call alert??
Thanks for the help!!
MDC1200 is set for decode on one channel, both individual ID (1598) and group ID (610).
When paging the radio: Works when paging the individual unit, but not group. Any ideas??
Could it be selective call vs call alert??
Thanks for the help!!