XTL5000 Consolette Switched Ground or Voltage
Posted: Wed Aug 20, 2008 4:31 am
Ok, so I posted my solution for switched ground on the normal accessory connector for an XTL5000 in my other thread
Above is a diagram I made in MSPaint.
You put it in Horn and Light mode. When it receives a page it completes the circuit which trips the relays. The audio is then allowed through the relays to the PA, which in turn sends it to each speaker.
Above is a diagram I made in MSPaint.
You put it in Horn and Light mode. When it receives a page it completes the circuit which trips the relays. The audio is then allowed through the relays to the PA, which in turn sends it to each speaker.