Batboard

Will the CDM rib to mic cable work for an M1225? Looking at the pinout the CDM cable uses a boot connection and the M1225 does not. Just wanted to know before buying another cable.

I dont think the cdm cable will fit in the m1225 jack since the cdm jack is 10 pins

you can use a radius/maxtrac cable in a cdm without any problems though

so I think the only question here is "will it fit" and if it will then you're probably OK

Thanks

The CDM ribless cable works fine with the M1225 radios.

I have one of those also, I will give it a try. Thanks

i use the same cable for m1225's that i do for cdm's

HLA wrote:i use the same cable for m1225's that i do for cdm's

So do I. No problems.

Thanks all.

I am going to shut this one down. Mods could you lock this one.