Page 1 of 1
GP340 version 6 back to version 4
Posted: Wed Sep 03, 2008 7:15 am
by bradlington
Is there a way to change a code plug from a higher version to a lower version .
My old GP340 is ver 4 and my newer one is version 6.0 which I do not have the software for .
Can this be done and what tools would I need to use .
Thanks /Brad
Re: GP340 version 6 back to version 4
Posted: Thu Sep 04, 2008 6:14 pm
by HLA
if you are referring to firmware you can not go backwards with firmware
Re: GP340 version 6 back to version 4
Posted: Thu Sep 04, 2008 6:35 pm
by Mfire39
HLA wrote:you can not go backwards with firmware
Sure you can..
-Marc
Re: GP340 version 6 back to version 4
Posted: Fri Sep 05, 2008 7:54 am
by bradlington
OK-I have one saying that one cant go back and one says yes.
Confused -can you elaborate on how to go back or is there a special way to reverse the firmware.
Thanks
Brad
Re: GP340 version 6 back to version 4
Posted: Fri Sep 05, 2008 1:33 pm
by NSPD
There is a labtool kit out there that will allow you to write in any version firmware that you have.