Page 1 of 1
Setting of the top PTT LED colour
Posted: Thu Oct 02, 2008 7:09 am
by KMB
Hello,
Can I change the top LED light colour?
As it is orange in scanning and green in Tx, I hope them setting is exchnaged, orange for Tx and Green in scanning.
Can I?
Thank~~~~~
KMB
Re: Setting of the top PTT LED colour
Posted: Thu Oct 02, 2008 8:19 am
by alex
KMB wrote:Hello,
Can I change the top LED light colour?
As it is orange in scanning and green in Tx, I hope them setting is exchnaged, orange for Tx and Green in scanning.
Can I?
Thank~~~~~
KMB
Probably not. You may be able to do some funny hardware modifications to change what color indicates what function, but it's probably not worth the effort. Additionally if you wanted to do it in software it would require a custom re-write of the firmware.
-Alex
Re: Setting of the top PTT LED colour
Posted: Thu Oct 02, 2008 12:32 pm
by Hightower
Unsolder the existing LED, and solder a new one of your color choice - done.
Mouser or digi-key, have what you need
Re: Setting of the top PTT LED colour
Posted: Thu Oct 02, 2008 1:31 pm
by alex
HT-
Correct me if I'm wrong- but it's a tri color LED - Orenge, Red, and Green - at that point your at slim pickings for tri color led's....
-Alex
Re: Setting of the top PTT LED colour
Posted: Thu Oct 02, 2008 10:18 pm
by Hightower
Ya, they are slim pickings, but do exist. There are many form factors for SMT LEDS - especially tri colored ones.
Mouser has a few like this:
http://www.mouser.com/Search/ProductDet ... MkWQ%3d%3d