Batboard

We service a CCII Plus CRT console - 4 position. All at once at the bottom of all four screens a yellow box popped up and in it was a message OCIIRFFPP. Never happened before, never seen this, cannot find any information on the message. Any input would be helpful.

This means the following:

TDM Address 0C Base Interface Module (BIM) failed testing.

Replace whichever card is at TDM address 0C, it should be a BIM (though it looks like your error message had too many digits in it).

Regardless, the problem is at TDM 0C (Zero C)