Batboard

Is it possiable to change the display time for the radio ID when on a talkgroup? This is for an MTS 2000 on a Motorola Type II system. Also does anyone know what firmware level the radio ID display became supported? I have two radios and of course the older of the two does nto support it.

should be under radio wide, display settings. the default is like 300ms, I set it to 2000 ms (2 sec).

as far as ID display, IIRC the f/w has to be in the 6.xx, anything lower it doesn't work.

Thanks so much for the quick reply and answer