Batboard

emergency fix fo antenna...
i found that i had a crack in the antenna down by the ribs , i tried to use black tape...(does not look good)
so i found that if you use HEAT SHRINK TUBING it works very well
it still has flex to the antenna
just take your time so you dont melt the heat shrink
i use 1 pice 3/8 X 1.25"

just wanted to pass it along....scott

I think that a type of heat shrink is what is on there in the first place

Plasti-Dip works great also.

http://www.plastidip.com/home_solutions/Plasti_Dip

NOW thats not a bad idea either

Hmmm...is there an echo in here?

http://batboard.batlabs.com/viewtopic.p ... 16#p366216

The availability of heat shrink tubing is why we never object when our wives ask
for a new hair dryer, although the really hot air guns work faster.

Tom in D.C. wrote:The availability of heat shrink tubing is why we never object when our wives ask
for a new hair dryer, although the really hot air guns work faster.

Blasphemy! You can have my Ungar/Weller 6966 when you pry it from my cold, dead fingers! Besides, hair dryers don't work well on the adhesive-lined heat shrink...

i used a match to shrink mine