Page 1 of 1
Astro CPS Will Not Let Me Enter 155.790
Posted: Tue Dec 23, 2008 11:12 am
by contrak10
I have a XTS1500 VHF Split and I can enter every single frequency I want except 155.790. It gives me an invalid entry red mark. Its within the band split so what gives?
Anyone else encountering a similar problem?
FYI: Its the latest CPS.
Re: Astro CPS Will Not Let Me Enter 155.790
Posted: Tue Dec 23, 2008 3:22 pm
by jmr061
I have CPS 12 with my XTS5000 VHF codeplug and it took that freq fine.
FYI.
Jason
Re: Astro CPS Will Not Let Me Enter 155.790
Posted: Tue Dec 23, 2008 3:51 pm
by escomm
My XTS2500 takes it just fine as well, and the 2500 has the same guts as a 1500.
Re: Astro CPS Will Not Let Me Enter 155.790
Posted: Tue Dec 23, 2008 4:30 pm
by HLA
if you want to email me the codeplug i'll try to enter it and see what happens?
Re: Astro CPS Will Not Let Me Enter 155.790
Posted: Tue Dec 23, 2008 7:00 pm
by OCSD117
What error do you get and can you post a screen shot?
Re: Astro CPS Will Not Let Me Enter 155.790
Posted: Wed Dec 24, 2008 6:57 pm
by kb9suy
The only idea i have is you have encryption turned on that channel and it is set as narroband and non P-25. only guess i have.
Re: Astro CPS Will Not Let Me Enter 155.790
Posted: Fri Dec 26, 2008 3:01 pm
by contrak10
Sorry for the wait, ill run to work and get a snap shot and code plug copy to anyone interested in solving this
Re: Astro CPS Will Not Let Me Enter 155.790
Posted: Fri Dec 26, 2008 5:32 pm
by mike m
If the channel is set to narrow band, 2.5 Khz Tx Opt Deviation, in the Zone channel assignment field and the mode in the personality is set to non astro then yes you will receive this error.
You need to either set the tx deviation to 4 or 5 Khz if you want non astro operation or set the receive to mixed mode in the conventional pers field to clear the error.
Mike