GM360 dead
Posted: Thu Dec 25, 2008 3:14 am
Hi gays,
I have a problem,during the upgrade of my GM360 error message is popup "no responds from radio erase EEPROM field". Use flash adapter 9742,RIB,programing cable form batlabs,GM360 is model MDM25KHF9AN5A,TANAPA: IMUD6013A , I connect 25 pin female connector from flash adapter to acc.conector (pin1 to pin7 of acc.connector,pin15 to pin 17 boot and pin 25 to pin 18 boot control).when I try to upgrade first part is ok download bootcode,but when it came to erase EEPROM error message is on,no responds from radio.After that Gm360 is behave like dead,can't turn it on,and no power up tones.I try to program whit saved archive codeplug,nothing is happening,only message couldn't open port.Only thing ,what I can do is again download bootcode and then there is the same message erase EEPROM faild.What I did or do wrong,help pleas.Tx
I have a problem,during the upgrade of my GM360 error message is popup "no responds from radio erase EEPROM field". Use flash adapter 9742,RIB,programing cable form batlabs,GM360 is model MDM25KHF9AN5A,TANAPA: IMUD6013A , I connect 25 pin female connector from flash adapter to acc.conector (pin1 to pin7 of acc.connector,pin15 to pin 17 boot and pin 25 to pin 18 boot control).when I try to upgrade first part is ok download bootcode,but when it came to erase EEPROM error message is on,no responds from radio.After that Gm360 is behave like dead,can't turn it on,and no power up tones.I try to program whit saved archive codeplug,nothing is happening,only message couldn't open port.Only thing ,what I can do is again download bootcode and then there is the same message erase EEPROM faild.What I did or do wrong,help pleas.Tx