Page 1 of 1
XTL 5000 O5 Head MIC Connector Pin-Out
Posted: Sat Dec 27, 2008 11:44 pm
by motorola-radio
What is the pin-out of the XTL 5000 O5 head's MIC connector ? (Not the high power CGAI)
Thanks !
Re: XTL 5000 O5 Head MIC Connector Pin-Out
Posted: Sun Dec 28, 2008 5:43 am
by GEMOTO
Pin Function
1 1 Wire
2 PTT
3 Speaker
4 USB_D-/RXD
5 Ground
6 VBus
7 Mic Hi
8 GPIO_1/USB_D+/TXD
9 HUB/Key Fail
10 GPIO_0/PWR_On
Re: XTL 5000 O5 Head MIC Connector Pin-Out
Posted: Sun Dec 28, 2008 8:38 am
by motorola-radio
If I want to modify the HKN6155 Flash/programming cable use at O5 MIC connector,how to connect that pins TX,RX,RTS and CTS ?
Thanks !
Re: XTL 5000 O5 Head MIC Connector Pin-Out
Posted: Sun Dec 28, 2008 10:28 am
by akardam
Not sure why you'd want to butcher a perfectly good HKN6155 to get a GCAI programming cable when you can get a HKN6184 USB GCAI cable for $45...