110 watt spectra dual heads

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Richard Collier
Posts: 225
Joined: Wed Jan 30, 2002 4:00 pm

110 watt spectra dual heads

Post by Richard Collier »

I want to run two control heads and a pa/siren modual which I have. question is can I run two A-9s and siren at the same time and is there a special cable to do so. One head up front and the other installed in a camper. The radio will do both control heads but where to plug in the siren/pa cable. If one has a special cable made for the set up please let me know.
Top
Mike B
Posts: 907
Joined: Thu Sep 20, 2001 4:00 pm

Re: 110 watt spectra dual heads

Post by Mike B »

I believe the HKN4376B T-cable should work attached from the Siren/PA to the rear control head. My information is this cable was used on the Spectra and Syntor X 9000 rear heads, but I don't have one around to confirm its the correct part number.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”